Although the Core Server provides the BROADCAST gateway that sends to all gateways simultaneously, using the BROADCAST gateway should be avoided. This is the correct and most reliable way to import KNX data. Here you have the opportunity to enter a new IP address or choose an existing router or interface. If there is also no router or interface with a static IP address, it will ask you to enter one. If still nothing was found, it searches within the backbone. If no valid router or interface is found, it searches within the main line. It searches first in the KNX line where the group address is assigned. The ETS App automatically searches for routers and interfaces that have a static IP address set. So, to communicate with a communication object we need both the KNX group address and the IP address. Since we use IP we also need to know the IP address of the KNXnet/IP router or interface that we have to use. The KNX group address is the identifier to communicate with the communication object. How does the NETx BMS App Secure work?ĭuring the export, the app searches for all communication objects of all devices in all lines which are connected to KNX group addresses.
#Knx ets 5 license pro
In addition, an ETS app can only be installed with a valid ETS license (ETS lite, ETS Pro or ETS Supplementary) – ETS apps cannot be used with the demo mode of ETS. The following steps explain how the NETx BMS App Secure can be installed within your ETS installation. Using the NETx BMS App Secure, the entire KNX project including the well-known ETS view can be imported into the NETx BMS Platform Core Server in a fast and intuitive way.Īll ETS apps have to be validated by the KNX Association. Thus, a manual, time-consuming and error-prone assignment of the KNX group addresses to the KNXnet/IP routers and interfaces is not necessary anymore. Based on the topology of the KNX project, the app automatically assigns the KNX group addresses to the respective routers and interfaces that are later used to access them. For KNXnet/IP routers and interfaces that support KNXnet/IP Security, the necessary security configuration is exported, too.
In addition, the app detects the configured IP addresses of the KNXnet/IP routers and interfaces.
#Knx ets 5 license full
The output of the NETx BMS App Secure for ETS is an enhanced export file that contains the used KNX group addresses, the deployed KNXnet/IP routers and interfaces, and the full ETS project structure including the network topology (areas, lines, devices, and communication objects) as well as the building and trade view. The NETx BMS App Secure is a user-friendly way to import the entire KNX project and its meta-information into the NETx BMS Platform Core Server. This export functionality provides only basic information about the KNX installation. To import the configuration of a KNX project into a management application like an OPC server, the ETS offers an export function called "Export OPC".
0 kommentar(er)
